DIGITEN LCD Display Water Flow Quantitative Controller
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC; Output: 12VDC, max 2A
Adapter lead length: 1m
Measuring Accuracy: ±1%
Output for Solenoid valve: 12VDC, max 5A
Temperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
Max Total Volume : 999999 G/L
Quantitative Range: 0-9999.99 G/L
Flow Rate Range: 0-9999.99/LPM(GPM)
Cable Length : 1m
Operation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: <85%
1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.
2, Please use teflon on the thread when requirement, ensure don't leak.
3, The wires can be extended up to 10m.
4, Avoid the water into the controller.
1 x DFC15 controller
1 x Temperature sensor
1 x Power adapter
1 x Manual
We Also Recommend
SENSTREE G1/2" Liquid Display Water Flow Quantitative Controller Meter+Solenoid Valve
G2" inch Water Liquid Controller Display Flow Control Meter Quantitative 10-200LPM
How do I factory reset this product? It will not measure the quantity of water or show LPM?
can you please email me this water meters manual? i want to buy one, but want to see what this unit is capable of?
any WiFi connectivity? to send alarm to an APP?
Good product. Meter was accurate and worked great.
Item appears manufactured quite well. Arrived on time. Will but same again if needed. very impressed with the menu options, instructions and ease of install. reminder to always switch to STOP before changing/resetting options. wish it had more than one input channel. comes WITH the temp sensor. there are no standard fitting at hardware store for this. i took a PVC end cap and tapped thread into it, wrapped the temp sensor with thread tape and screwed it in on top of an inline t-fitting. thread was 8 x 1.25 if i recall correctly