DIGITEN Wireless Temperature Controller Thermostat Outlet Remote Control with 2m/6ft NTC Temp Sensor
【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). It can save all settings even if the power failure.
【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc.
【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Free to switch between ℃/℉. Maintains stable room temperature and provides comfort and energy saving.
【ON/OFF manual button on the transmitter】: Manually turn on/off the receiver remotely. LCD with backlight display reading accurately. Portable design, handheld/wall mounted.
【High Accuracy】: Receiver with 2m/6ft NTC highly accurate temperature probe, ambient temperature is detected automatically by thermostat outlet, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W
The DIGITEN wireless thermostat is intended for automatic control of electrical heating appliances or cooling appliances, it will automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving.
The difference between WTC100 and WTC200:
WTC100: Temperature probe is built into the remote control(transmitter).
WTC200: Receiver(thermostat outlet)with 2m/6ft NTC probe
Operating voltage: 100-240V AC
Load capacity: 100-240VAC 14A, 1500@110VAC, 3000W@220VAC
Remote batteries required: 2PCS 1.5V AAA, standby for 6 months
Transmission distance: 100m (open space)
Measuring temperature range: -10℃~80℃, 14℉~176℉
Activation temperature range: 0℃~70℃, 32℉~158℉
Temperature accuracy: ±0.1℃/℉
Control Precision: ±1℃/℉
High and low temperature alarm: 0℃~80℃/32℉~176℉
Remote control refresh frequency: 20 Seconds
Temperature probe: Receiver(thermostat outlet) with 2m/6ft NTC probe
Cooling mode and Heating mode conversion:
Set the temperature RUN value higher than the STOP value(RUN >STOP), the controller is in cooling mode.
Set the temperature RUN value lower than the STOP value(RUN <STOP), the controller is in heating mode.
1, 2 AAA size batteries are needed for the remote. The package will not include batteries.
2, Multiple sets of equipment will not interfere with each other.
1x Remote Controller
1x 2m/6ft NTC probe
1x User Manual
We Also Recommend
DIGITEN LCD Digital Thermostat Simple Stage Pre-Wired Temperature Controller
DIGITEN Wireless Thermostat Temperature Controller Outlet Remote Control Built in Temp Sensor
I purchased this for a wall AC unit after 5 minutes or so it turns off I have the Run at 75 and the stop at 70. Why won’t it work
We still haven’t received it...
Have not receive this as of today.